Irradiation-induced molecular dipole reorientation in inverted polymer solar cell using small molecular electron collection layer

Inverted polymer solar cell is developed using small molecular tris(8-hydroxyquinolinato) aluminum (Alq3) as an electron collection layer between the active layer and indium-tin-oxide bottom cathode. Upon post-processing light irradiation by simulated solar illumination, the open-circuit voltage of the inverted device increases from 0.52 V to 0.60 V, resulting in the enhancement of the power conversion efficiency from 2.54 to 3.33 with negligible change in the short-circuit current. The performance improvement is attributed to the removal of surface potential due to irradiation-induced molecular dipole reorientation in the Alq3 layer, which reduces the charge transport barrier and improves the charge collection efficiency. © 2011 American Institute of Physics

Robust Target Positioning for Reconfigurable Intelligent Surface Assisted MIMO Radar Systems

The direction of arrival (DOA) based multiple-input multiple-output (MIMO) radar technique has been widely utilized for ubiquitous positioning due to its advantage of simple implementability. On the other hand, reconfigurable intelligent surface (RIS) has received considerable attention, which can be deployed on the walls and objects to strengthen the positioning performance. However, RIS is usually not equipped with a perception module, which results in the tremendous challenge for RIS-assisted positioning. To tackle this challenge, this paper propose the fundamental problem of DOA-based target positioning in RIS-assisted MIMO radar system. Unlike conventional DOA estimation systems, the beneficial role of RIS is investigated in MIMO radar system, where a nonconvex $\ell _{p}$ promoting function is exploited to estimate DOA task. By adjusting the reflecting elements of the RIS, the proximal projection iterative strategy is developed to obtain the feasible solution. Both theoretical analysis and simulation results illustrate that the proposed scheme can achieve remarkable positioning performance and shed light on the benefits offered by the adoption of the RIS in terms of positioning performance

An endophytic Taxol-producing fungus BT2 isolated from Taxus chinensis var. mairei

BT2, a newly isolated endophytic fungus from Taxus chinensis var. mairei, was observed to produce Taxol. Besides Taxol, a potent anticancer drug, BT2 could also yield taxane baccatin III, which was an important intermediate for Taxol and semi-synthesis of Taxol in industry. The isolation of such a fungusmay provide a promising alterative approach to produce Taxol, and BT2 can serve as a potential material for fungus engineering to improve Taxol productio

Many-shot from Low-shot: Learning to Annotate using Mixed Supervision for Object Detection

Object detection has witnessed significant progress by relying on large, manually annotated datasets. Annotating such datasets is highly time consuming and expensive, which motivates the development of weakly supervised and few-shot object detection methods. However, these methods largely underperform with respect to their strongly supervised counterpart, as weak training signals \emph{often} result in partial or oversized detections. Towards solving this problem we introduce, for the first time, an online annotation module (OAM) that learns to generate a many-shot set of \emph{reliable} annotations from a larger volume of weakly labelled images. Our OAM can be jointly trained with any fully supervised two-stage object detection method, providing additional training annotations on the fly. This results in a fully end-to-end strategy that only requires a low-shot set of fully annotated images. The integration of the OAM with Fast(er) R-CNN improves their performance by $17\%$ mAP, $9\%$ AP50 on PASCAL VOC 2007 and MS-COCO benchmarks, and significantly outperforms competing methods using mixed supervision.Comment: Accepted at ECCV 2020. Camera-ready version and Appendice

Efficient inverted polymer solar cells with thermal-evaporated and solution-processed small molecular electron extraction layer

Efficient inverted polymer solar cell is reported upon by integrating with a small molecular 1,3,5-tri(phenyl-2-benzimi-dazolyl)-benzene (TPBi) electron extraction layer (EEL) at low processing temperature with thermal-evaporation and solution-process, resulting in the power conversion efficiencies of 3.70 and 3.47, respectively. The potential of TPBi as an efficient EEL is associated with its suitable electronic energy level for electron extraction and hole blocking from the active layer to the indium tin oxide cathode. © 2013 American Institute of Physics

Enhanced performance in polymer photovoltaic cells with chloroform treated indium tin oxide anode modification

Enhanced performance of a poly(3-hexylthiophene):(6,6)-phenyl C61 butyric acid methyl ester bulk heterojunction polymer photovoltaic cell is reported by modifying the indium tin oxide (ITO) anode with chloroform solution. Instead of the traditional UV-ozone treatment, the optimized chloroform modification on ITO anode can result in an enhancement in the power conversion efficiency of an identical device, originating from an increase in the photocurrent with negligible change in the open-circuit voltage. The performance enhancement is attributed to the work function modification of the ITO substrate through the surface incorporation of the chlorine, and thus improved charge collection efficiency. © 2011 American Institute of Physics

The association of chromosome 8p deletion and tumor metastasis in human hepatocellular carcinoma

Program no. 686postprin

Surface plasmon-enhanced electroluminescence in organic light-emitting diodes incorporating Au nanoparticles

Surface plasmon-enhanced electroluminescence (EL) in an organic light-emitting diode is demonstrated by incorporating the synthesized Au nanoparticles (NPs) in the hole injection layer of poly(3,4-ethylene dioxythiophene):polystyrene sulfonic acid. An increase of ∼25% in the EL intensity and efficiency are achieved for devices with Au NPs, whereas the spectral and electrical properties remain almost identical to the control device. Time-resolved photoluminescence spectroscopy reveals that the EL enhancement is ascribed to the increase in spontaneous emission rate due to the plasmonic near-field effect induced by Au NPs. © 2012 American Institute of Physics

Inhibition of the tyrosine phosphatase SHP-2 suppresses angiogenesis in vitro and in vivo

Endothelial cell survival is indispensable to maintain endothelial integrity and initiate new vessel formation. We investigated the role of SHP-2 in endothelial cell survival and angiogenesis in vitro as well as in vivo. SHP-2 function in cultured human umbilical vein and human dermal microvascular endothelial cells was inhibited by either silencing the protein expression with antisense-oligodesoxynucleotides or treatment with a pharmacological inhibitor (PtpI IV). SHP-2 inhibition impaired capillary-like structure formation (p < 0.01; n = 8) in vitro as well as new vessel growth ex vivo (p < 0.05; n = 10) and in vivo in the chicken chorioallantoic membrane (p < 0.01, n = 4). Additionally, SHP-2 knock-down abrogated fibroblast growth factor 2 (FGF-2)-dependent endothelial proliferation measured by MTT reduction ( p ! 0.01; n = 12). The inhibitory effect of SHP-2 knock-down on vessel growth was mediated by increased endothelial apoptosis ( annexin V staining, p ! 0.05, n = 9), which was associated with reduced FGF-2-induced phosphorylation of phosphatidylinositol 3-kinase (PI3-K), Akt and extracellular regulated kinase 1/2 (ERK1/2) and involved diminished ERK1/2 phosphorylation after PI3-K inhibition (n=3). These results suggest that SHP-2 regulates endothelial cell survival through PI3-K-Akt and mitogen-activated protein kinase pathways thereby strongly affecting new vessel formation. Thus, SHP-2 exhibits a pivotal role in angiogenesis and may represent an interesting target for therapeutic approaches controlling vessel growth. Copyright (C) 2007 S. Karger AG, Basel

Fiber-optic parametric amplifier and oscillator based on intracavity parametric pump technique

Chinese Government Scholarship of Postgraduates' Oversea Study For Building High-Level UniversityA cost-effective fiber optical parametric amplifier (FOPA) based on the laser intracavity pump technique has been proposed and demonstrated experimentally. The parametric process is realized by inserting a 1 km highly nonlinear dispersion-shifted fiber (HNL-DSF) into a fiber ring-laser cavity that consists of a high-power erbium-doped fiber (EDF) amplifier and two highly reflective fiber Bragg gratings. Compared with the conventional parametric pump schemes, the proposed pumping technique is free from a tunable semiconductor laser as the pump source and also the pump phase modulation. When the oscillating power of 530 mW in the EDF laser cavity is achieved to pump the HNL-DSF, a peak parametric gain of 27.5 dB and a net gain over 45 nm are obtained. Moreover, a widely tunable fiber-optic parametric oscillator is further developed using the FOPA as a gain medium. (C) 2009 Optical Society of Americ